http://invisible-island.net/athena_widgets/XawPlus
The following functions are provided as convenience routines for use with the Text widget. Although many of these actions can be performed by modifying resources, these interfaces are frequently more efficient.
These data structures are defined in the Text widget's public header file, <X11/Xaw/Text.h>.
typedef long XawTextPosition;
Character positions in the Text widget begin at 0 and end at n+1, where n is the number of characters in the Text source widget.
typedef struct {
int firstPos;
int length;
char *ptr;
unsigned long format;} XawTextBlock, *XawTextBlockPtr;
| firstPos | The first position, or index, to use within the ptr field. The value is commonly zero. |
| length | The number of characters to be used from the ptr field. The number of characters used is commonly the number of characters in ptr, and must not be greater than the length of the string in ptr. |
| ptr | Contains the string to be referenced by the Text widget. |
| format | This field is not currently used, but should be specified as XawFmt8Bit. |
To select a piece of text, use XawTextSetSelection():
void XawTextSetSelection(w, left, right)
Widget w;
XawTextPosition left, right;
w Specifies the Text widget. left Specifies the character position at which the selection begins. right Specifies the character position at which the selection ends.
If redisplay is enabled, this function highlights the text and makes it the PRIMARY selection. This function does not have any effect on CUT_BUFFER0.
To unhighlight previously highlighted text in a widget, use XawTextUnsetSelection():
void XawTextUnsetSelection(w)
Widget w;
w Specifies the Text widget.
To retrieve the text that has been selected by this text widget use XawTextGetSelectionPos():
void XawTextGetSelectionPos(w, begin_return, end_return)
Widget w;
XawTextPosition *begin_return, *end_return;
w Specifies the Text widget. begin_return Returns the beginning of the text selection. end_return Returns the end of the text selection.
If the returned values are equal, no text is currently selected.
To modify the text in an editable Text widget use XawTextReplace():
int XawTextReplace(w, start, end, text)
Widget w;
XawTextPosition start, end;
XawTextBlock *text;
w Specifies the Text widget. start Specifies the starting character position of the text replacement. end Specifies the ending character position of the text replacement. text Specifies the text to be inserted into the file. This function will not be able to replace text in read-only text widgets. It will also only be able to append text to an append-only text widget.
This function may return the following values:
| XawEditDone | The text replacement was successful. |
| XawPositionError | The edit mode is XawtextAppend and start is not the position of the last character of the source. |
| XawEditError | Either the Source was read-only or the range to be deleted is larger than the length of the Source. |
The XawTextReplace arguments start and end represent the text source character positions for the existing text that is to be replaced by the text in the text block. The characters from start up to but not including end are deleted, and the characters specified on the text block are inserted in their place. If start and end are equal, no text is deleted and the new text is inserted after start.
To search for a string in the Text widget, use XawTextSearch():
XawTextPosition XawTextSearch(w, dir, text)
Widget w;
XawTextScanDirection dir;
XawTextBlock *text;
w Specifies the Text widget. dir Specifies the direction to search in. Legal values are XawsdLeft and XawsdRight. text Specifies a text block structure that contains the text to search for.
The XawTextSearch() function will begin at the insertion point and search in the direction specified for a string that matches the one passed in text. If the string is found the location of the first character in the string is returned. If the string could not be found then the value XawTextSearchError is returned.
To redisplay a range of characters, use XawTextInvalidate():
void XawTextInvalidate(w, from, to)
Widget w;
XawTextPosition from, to;
w Specifies the Text widget. from Specifies the start of the text to redisplay. to Specifies the end of the text to redisplay.
The XawTextInvalidate function causes the specified range of characters to be redisplayed immediately if redisplay is enabled or the next time that redisplay is enabled.
To enable redisplay, use XawTextEnableRedisplay():
void XawTextEnableRedisplay(w)
Widget w;
w Specifies the Text widget.
The XawTextEnableRedisplay() function flushes any changes due to batched updates when XawTextDisableRedisplay() was called and allows future changes to be reflected immediately.
To disable redisplay while making several changes, use XawTextDisableRedisplay().
void XawTextDisableRedisplay(w)
Widget w;
w Specifies the Text widget.
The XawTextDisableRedisplay() function causes all changes to be batched until either XawTextDisplay() or XawTextEnableRedisplay() is called. To display batched updates, use XawTextDisplay():
void XawTextDisplay(w)
Widget w;
w Specifies the Text widget.
The XawTextDisplay() function forces any accumulated updates to be displayed.
To obtain the character position of the left-most character on the first line displayed in the widget (the value of the displayPosition resource), use XawTextTopPosition().
XawTextPosition XawTextTopPosition(w)
Widget w;
w Specifies the Text widget.
To assign a new selection array to a text widget use XawTextSetSelectionArray():
void XawTextSetSelectionArray(w, sarray)
Widget w;
XawTextSelectType *sarray;
w Specifies the Text widget. sarray Specifies a selection array as defined in the section called Text Selections for Application Programmers.
Calling this function is equivalent to setting the value of the selectionTypes resource.
To move the insertion point to the specified source position, use XawTextSetInsertionPoint():
void XawTextSetInsertionPoint(w, position)
Widget w;
XawTextPosition position;
w Specifies the Text widget. position Specifies the new position for the insertion point.
The text will be scrolled vertically if necessary to make the line containing the insertion point visible. Calling this function is equivalent to setting the insertPosition resource.
To obtain the current position of the insertion point, use XawTextGetInsertionPoint():
XawTextPosition XawTextGetInsertionPoint(w)
Widget w;
w Specifies the Text widget.
The result is equivalent to retrieving the value of the insertPosition resource.
To replace the text source in the specified widget, use XawTextSetSource():
void XawTextSetSource(w, source, position)
Widget w;
Widget source;
XawTextPosition position;
w Specifies the Text widget. source Specifies the text source object. position Specifies character position that will become the upper left hand corner of the displayed text. This is usually set to zero.
A display update will be performed if redisplay is enabled.
To obtain the current text source for the specified widget, use XawTextGetSource():
Widget XawTextGetSource(w)
Widget w;
w Specifies the Text widget.
This function returns the text source that this Text widget is currently using.
To enable and disable the insertion point, use XawTextDisplayCaret():
void XawTextDisplayCaret(w, visible)
Widget w;
Boolean visible;
w Specifies the Text widget. visible Specifies whether or not the caret should be displayed.
If visible is False the insertion point will be disabled. The marker is re-enabled either by setting visible to True, by calling XtSetValues(), or by executing the display-caret action routine.
None.